Inspection Services by Peter Plumbing

100_0704-copy
CHS-boiler-red_480

Boiler Inspection

There are two kinds of inspections for boilers.

  • Initial Inspection
  • Annual Inspections

All new boiler installations must be inspected by the Dept. of Buildings.

After the initial inspection, as required by law, once a year all boilers including low and high pressure, in all commercial buildings, mixed use buildings, and dwellings with six or more families, must be inspected annually by building owners for operational safety and to ensure compliance with the NYC Building Code and other regulations.

Annual Inspection

Choose Peter Plumbing for all your boiler inspection needs.

Owners must annually certify to the Dept. of Buildings that their boilers have been inspected by an entity qualified to do so.

Not only will you abide by the law by having an annual inspection, it may also prolong the life of your boiler as well, preventing unnecessary headaches with no hot water calls.

If your boiler and building meet any of criteria below, you are required by law to have an annual boiler inspection.

  • Boilers rated for 350,000 BTU’s and 15 PSI or more.
  • All High Pressure Boilers.
  • Residential Buildings with 6 or more families.
  • All Commercial buildings.
  • All Mixed Use buildings.

If you meet any of the conditions above, please give us a call to set up your boiler inspection.

Annual inspection ensures the operational safety and compliance with the NYC Building Code and other regulations. Failure to do so will result in open violations which cost you penalty and prevent an owner from selling or refinancing the property.

We are here to answer any questions you might have. (718) 888-1855.

  • STEAM BOILER
  • WATER BOILER
chemigation-figure1-480x251

Backflow Preventer Inspection

Backflow Testing in New York

New York City law requires that all backflow systems on certain properties receive testing from a certified tester once a year. If it is time for your property to receive testing on its backflow prevention device, please call us to make an appointment at (718) 888 -1855.

 

Information about backflow testing

Since back-flow prevention devices are mechanical devices, they have the potential to fail. In order to ensure that the public water supply stays free of harmful chemicals and contaminants, certain properties are required to have back-flow prevention devices installed in their water systems.

These devices must properly function in order for them to fulfill their purpose. Therefore, New York’s law also requires that the devices be inspected on a yearly basis and tested for any possible failures that may threaten public health. For more information on back-flow inspection, call us today at (718) 888-1855.

  • REDUCED PRESSURE ZONE (RPZ)
  • DOUBLE CHECK VALVE (DCV) WITH BYPASS
  • 5 BOROUGHS OF NEW YORK CITY